Bearing-free magnetic absolute encoders
Key Features
- Heavy-Duty Magnetic Absolute Encoder for precise position measurement
- Contactless, Bearingless Design for wear-free operation
- Supports Large Shaft Diameters with pulse wheels up to Ø1500 mm
- 16-Bit Singleturn Resolution with Parallel, SSI & EtherCAT interfaces
- IP68 Protection with operating temperatures from -40°C to +85°C
- Optional Split Pulse Wheel, Fiber Optic & Protective Bandages (Stainless Steel/CFRP)
Want to check if this is the right product for you?
Download Application QuestionnaireSpecifications
Supply voltage
12-30 VDC
Signal amplitude
HTL or TTL
Resolution
Singleturn max. 16 bit (65536 steps per rotation)
Interface
therCAT (binary) |
SSI (binary or gray) |
Parallel (gray) | MAGA P
Output data: Position, speed, sample time (SSI: position only)
Other interfaces on request
Type of construction
- Pulse wheel outside diameter: up to approx. Ø 1,500 mm
- Axial tolerance: ±3 mm (offset scanning head/pulse wheel), optional up to ±8 mm
- Radial tolerance: up to 1.0 mm (air gap scanning head/pulse wheel)
Operating Temperature range
-40 °C to +85 °C
Degree of protection
IP66 to IP68
Device options / Function
- Additional incremental output (separate scanning head)
- Additional magnetic track with reference pulse
- Overspeed switch with switching speed (0.63 to 5600 rpm) set ex-works
- Incremental signals via fiber optic cable (50 / 125 μm or 62.5 / 125 μm)
Number of pulses
Up to 65536
Output signals
0° and 90° track, reference pulse, check output and inverted signals
Maximum Speed / Frequency
4000 rpm / max. 200 kHz (HTL, TTL), max. 1 MHz (CLK)
Solid shaft
Ø 14 mm with feather key
Hollow shaft
Ø 20 mm with keyway
Certificates / Approvals
UL/CSA
Related Products
-
Read moreKey Features
- Heavy-Duty Magnetic Encoder for precise speed measurement
- Contactless, Bearingless Design for wear-free operation
- Supports Large Shaft Diameters with pulse wheels up to Ø1350 mm
- High Resolution up to 200,000 PPR (HTL/TTL)
- IP68 Protection with operating temperatures from -40°C to +100°C
Want to check if this is the right product for you?
-
Read moreKey Features
- Robust Magnetic Encoder for precise speed and position measurement
- ATEX Zone 2 Certified for hazardous gas environments
- Large Hollow Shaft Support up to Ø380 mm
- Absolute & Incremental Versions with up to 16-bit resolution and 65,536 PPR
- IP67 Protection with operating temperatures from -30°C to +80°C
- Optional Additional Scanning Head for enhanced flexibility
Want to check if this is the right product for you?